Storm demand and Florida's wind-load requirements shape prices here. These are planning estimates, not quotes.
Tampa Bay project cost estimator
Planning estimate
$12,100 – $19,800
Rough planning range only — not a quote. Real bids depend on site conditions, permits, materials and the contractor.
Typical ranges by project
| Project | Common scope | Typical range (estimate) |
|---|---|---|
| Roof Replacement | Architectural shingle (24 squares) | $11,000 – $18,000 |
| Class 4 impact-resistant (24 squares) | $13,000 – $21,500 | |
| Standing-seam metal (24 squares) | $24,000 – $41,000 | |
| Impact Windows & Doors | Impact window (each, installed) | $1,100 – $2,400 |
| Whole home (15 openings) | $18,000 – $40,000 | |
| Impact sliding door | $4,000 – $9,000 | |
| Kitchen Remodeling | Refresh (150 sq ft) | $11,000 – $22,500 |
| Mid-range remodel (150 sq ft) | $30,000 – $52,500 | |
| High-end / layout change (150 sq ft) | $60,000 – $105,000 | |
| Bathroom Remodeling | Refresh (60 sq ft) | $7,000 – $13,000 |
| Full remodel (60 sq ft) | $15,000 – $27,000 | |
| Primary-bath upgrade (60 sq ft) | $30,000 – $51,000 | |
| HVAC | Standard split system | $9,000 – $14,000 |
| Heat pump | $11,000 – $18,000 | |
| High-efficiency variable speed | $16,000 – $26,000 | |
| Lanais, Patios & Screen Enclosures | Aluminum lattice (300 sq ft) | $7,500 – $13,500 |
| Solid roof wood / steel (300 sq ft) | $13,500 – $24,000 | |
| Louvered / custom (300 sq ft) | $24,000 – $42,000 | |
| Pavers & Driveways | Concrete patio (400 sq ft) | $4,000 – $7,000 |
| Concrete pavers (400 sq ft) | $7,000 – $13,000 | |
| Travertine / premium (400 sq ft) | $11,000 – $18,000 | |
| Flooring | Luxury vinyl plank (800 sq ft) | $5,000 – $9,000 |
| Engineered hardwood (800 sq ft) | $8,000 – $13,500 | |
| Porcelain tile (800 sq ft) | $9,500 – $20,000 | |
| Exterior Painting | Repaint, minor prep (2,000 sq ft) | $4,000 – $7,000 |
| Full prep (2,000 sq ft) | $6,000 – $10,000 | |
| Elastomeric / heavy repair (2,000 sq ft) | $8,000 – $14,000 | |
| Fencing | Cedar privacy (6 ft) (150 linear ft) | $4,500 – $7,500 |
| Board-on-board / 8 ft (150 linear ft) | $7,000 – $10,500 | |
| Ornamental iron / aluminum (150 linear ft) | $6,000 – $12,000 |
Cost drivers
- Post-hurricane demand and permit backlogs
- High-velocity wind design and product approvals
- Flood-zone requirements and the 50% rule
- Coastal corrosion-resistant fasteners and materials